• Treats 15,000 cu. ft.; appx. 40' x 40' x 8'
  • Removes 106 pints/day
    (80°F, 60% RH)
  • 6.8 pints/KWH efficiency
    (80°F, 60% RH)
  • Uses only 6.6 amps

1 HiE100modThe HI-E DRY 100 high efficiency dehumidifier is designed and built with emphasis on efficiency and durability. The HI-E DRY 100 removes 6.8 pints of water per kilowatt hour at 80°F and 60% RH, while the industry average remains at only two to three pints. The high-efficiency design of the HI-E DRY 100 offers more than just dramatically reduced utility costs. The larger water removal capacity from a smaller, more efficient refrigeration system eliminates the need for 220 volt circuits in many applications. The smaller refrigeration system allows the HI-E DRY 100 to cost less than other commercial dehumidifiers of equal capacity. The HI-E DRY Model 100 features a dehumidistat controller with settings from 20 to 80 percent relative humidity and a positive "on" and "off" setting. A blower switch permits continuous blower operation independent of dehumidification. The unit is portable and has four casters. The internal condensate pump is capable of lifting condensate 17 feet, and 20 feet of condensate hose is included. The unit's 6 ft. power cord that plugs into a 115 volt receptacle with ground.

  • Removes 120 pints/day
    (80°F, 60% AHAM)
  • 6.62 pints/KWH efficiency (70°F, 60% RH)
  • 7.7 pints/KWH efficiency (80°F, 60% RH)

120 HiEdryHi-E DRY 120 dehumidifiers are designed and built with emphasis on efficiency and durability. Today’s Hi-E DRY 120 dehumidifiers remove  up to 7.7 pints of water per kilowatt hour, while the industry average remains at only two to three pints.
The high-efficiency design of Hi-E DRY 120 dehumidifiers offer more than just dramatically reduced utility costs. The larger water removal  capacity from a smaller, more efficient refrigeration system eliminates the need for 220 volt circuits in many applications. The smaller refrigeration system allows Hi-E DRY 120 dehumidifiers to cost less than other commercial dehumidifiers of equal capacity.
The Hi-E DRY 120 high efficiency dehumidifier utilizes refrigeration to cool the incoming air stream below its dew point as it passes through  he dehumidification (evaporator) coil. This cooling results in the removal of moisture (latent heat) and reduction in temperature (sensible heat). The cooled and dried air is used to precool the incoming air stream resulting in up to a 200 percent increase in overall  efficiency. After the precooling stage the processed air is reheated by passing through the condenser coil. The latent heat removed by the evaporator coil is returned to the air stream at this stage as sensible heat, resulting in an overall temperature increase from the incoming air.


TOP